|LIBRARY | ABOUT | CHANGING SHIRE | CHANGING SUBURBS | COMMUNITY STORIES | VOLUNTEERS | HERITAGE SITES|
Subdivision Plans for
Once Google Earth is installed, follow these steps to view the historic Subdivision Plans in Google Earth. You might find it easier to print these instructions beforehand - click HERE to open a print-friendly version of these instructions which you can print using your Browser's Print facility.
1. After reading all of these instructions, click on the following link for the Subdivision Plans:
2. A Dialog Box should open, asking you to save the Google Earth file, which should have the file extension ".kmz". Choose where you are going to save the file, then click SAVE.
3. Wait for the ".kmz" file to finish downloading, then locate it and open it by double-clicking it. Google Earth will open and display the Subdivision Plans in their respective locations in its 3D viewer. (You can also open Google Earth separately, then open the downloaded file by choosing "Open" from Google Earth's "File" menu).
4. In Google Earth, the links to the Subdivision Plans are found listed in the left-most panel, under Temporary Places, found at the bottom of the Places panel (you may need to scroll down to see them) - see screenshot, below.
the small box beside each Plan name makes that Plan visible in
the 3D viewer.
5. At the very bottom of the Places panel is a Transparency Slider. It controls the transparency of whichever Plan is highlighted in the list. (Make sure the Plan's name is highlighted, its "visibility" box is ticked, and that the highlighted Plan is in view in the 3D viewer).
6. Note that the Subdivision Plans are "draped" over the countryside in Google Earth. Use the usual Google Earth controls to zoom, rotate, and tilt your view so you can see how the Plans follow the contours of the ground.
|© 2011 The Hills Shire Council | Hills Voices Online | Library | Contact us | Disclaimer | e-newsletter ||